How To Install Tv On Stacked Stone

Mounting a TV higher up a fireplace is a project you tin can do yourself.  Yous can hide wires on a wall mounted Idiot box with the correct approach and tools.  But you probably have a lot of the same questions I did before I started this project similar:

• How high should a TV exist mounted over a fireplace?
• Can you lot mount a TV above a gas fireplace?
• Does heat from a fireplace damage TV?
• Can you mount a Telly above a brick fireplace?

I'one thousand going to respond those questions and show you how mounting a TV higher up a fireplace is a doable DIY project.  I'll also show you how to hide wires on a wall mounted TV and how you lot can likewise.

Before nosotros get started, brand sure to follow me on YouTube, Facebook and Instagram to keep up with all my latest builds!

Here is what you'll need for the project:

Mounting a Television receiver Above Fireplace

1. Identify fireplace structure
2. Decide how high to mountain the TV
3. Cull location for TV mount and electrical
4. Install Electric and Wire Chase
5. Attach TV Mountain
6. Mount Tv set to the Fireplace

i. Identify Fireplace Structure

When yous're mounting a TV above a fireplace you need to consider the blazon of fireplace structure you have.  Our fireplace is a gas burning insert so that's what this article will be focusing on.  Simply if yous have a woods burning fireplace this is a adept article that will have more than information to aid you out.

Our gas called-for insert fireplace has deep shelving on either side.

I was pretty sure information technology was hollow behind the fireplace merely needed to bank check.   I took off the shelf trim to see how the shelves were constructed and was happy to find they were made of drywall that I could easily cut into.

Next I cut a peep hole with my hole saw so that I could stick  my telephone inside the wall to meet what was going on behind the fireplace.

I was relieved to see open space and the woods framing around the fireplace insert. If you don't take access to peak behind your fireplace I'll give you some tips in a chip on how to find the framing.

Before we get likewise far though, let'southward talk about the commencement big question we needed to answer; should we mount a TV over a gas burning fireplace at all?

Can You Mount a Telly To a higher place a Gas Fireplace?

The short respond is yeah, you can mountain a Television receiver above a gas fireplace.  But y'all need to make sure it'south properly mounted and secured.  Knowing that I could get behind the fireplace was really helpful.  That access would allow me to make sure I was tying into a stud or header which will support the weight of the TV.

Does Oestrus From a Fireplace Damage Tv?

After a picayune research I found you want to keep the Television receiver under 100 degrees Fahrenheit.  So I decided to run a test to find out how hot it gets where my Goggle box would be.

I cranked up the fireplace and taped a thermometer to the rock where it would get the nigh rut.  I also put the gas on total blast which we almost never do and left the glass doors open just to become worst case numbers.

Subsequently 15 minutes running wide open it went from 75 to about eighty degrees.  I also checked around the rock and fireplace with an infrared thermometer to confirm the readings.

I checked back at thirty minutes and it had merely gone up to 81 but the surface of the thermometer looked to be closer to 86.  Simply that was well within a range I felt comfortable with. Cheque your own setup based on your fireplace usage to make sure it won't damage your Tv.

Does a Drape Assist Protect the Goggle box from Oestrus?

If you're mounting a TV above a fireplace with a mantle the Tv should be ameliorate protected from the rut.  A mantel tends to act as a buffer between your fireplace and the area where your TV is hanging.  But I would e'er utilize a thermometer and test the area where you plan to mountain your TV to make certain that it won't get also hot.

2. Determine Where To Mount Goggle box

Once I knew I could run the wiring behind the fireplace and secure the tv mount, it was fourth dimension answer some other big question. How high should you hang a Television receiver over a fireplace?

How High Should a Tv be Mounted Over a Fireplace?

Since we were hanging a 65″ Television and as a dominion of thumb, the middle of the screen should be 65 inches from the floor.  Simply when information technology comes downward to it, it's all about personal preference. My family unit was used to having our old Goggle box in a raised cabinet opening. That meant that the bottom of the onetime TV was l-ane/2 inches from the ground.  It never bothered us, nosotros didn't feel whatever neck strain and we liked having our TV at that summit.

So we mocked up Television screen using the packing sheeting came on our new 65″ OLED LG Television set.   Nosotros taped it to the fireplace to decide where we wanted to mount it.  Nosotros wanted the new Television receiver to be at nearly the same elevation as our old Telly, but not too shut to the fireplace below.  Finally We settled on a height of … 50-1/2 inches from the bottom of the TV to the floor.  We really know how to mix things upward.

If you're mounting a TV to a higher place a fireplace but you all the same want to be able to lookout man it at an even lower position, there is another selection.  The MantelMount allows y'all to mountain a TV higher up a fireplace so pull information technology down for viewing.  If you want more than information about this product they have a cracking website with lots of info.

iii. Choose location for Television mount and electric

Next nosotros unboxed the new OLED Boob tube we got from LG.  This OLED screen is ridiculously thin, and that ways the electronics and mountain location are much lower on the TV. We laid down the Goggle box and put the mounting arms over the bolt holes.  Then I measured from the bottom of the screen to the hook on the arms.  I'll employ this measurement to locate where the wall bracket should exist mounted on the wall.

We had placed a piece of tape where we wanted the bottom of our Goggle box to be.  And then we measured up from that spot and put another slice of tape on the fireplace.  We marked on the tape where the pinnacle of the subclass would be.

Can You lot Mount Television receiver Above a Brick Fireplace?

Or in our instance, stone.  The answer is yes, but yous may need to do a petty more work to get your infinite prepare for the TV mountain.  When we looked at the area where the TV mount needed to be attached one stone was sticking out much farther than the residue.  This was a problem because information technology interfered with the Tilting Television Wall Mountain, so it had to come out.

I used a masonry chisel and a modest pry bar and was able to pretty easily remove the stone that was sticking out.  Then I took it outside and used a wet saw to trim off plenty so that it wouldn't protrude besides far when it was reattached after on.

Notice Stud or Header Behind Fireplace

**If y'all don't take a hollow infinite backside your fireplace that y'all can become into, this information can help yous find your stud or header.**

With the rock all the same removed from the fireplace, I drilled some holes to get more information about my setup.

1. Beginning I used a masonry bit and drilled into the wall until I hitting wood.
   2. Then I switched to a forest bit, put it into the hole and marked on the scrap how deep it was inserted.  This mark volition show me where the wood starts.  In the moving-picture show below I'one thousand belongings my finger on the drill flake at the point where it needs to be marked.  Then I used a permanent marker to brand the marker on the drill bit.

   

   3. Next I drilled into the wood until I busted through and marked on the fleck how deep information technology was when it went through.  This tells me if information technology's going through something thinner similar OSB or if I've striking something thicker similar a stud or a header.  In my instance the drill chip went through the wood at about 1-i/2 inches which is thicker than OSB.

   

   four. Drill another pigsty nearly 3-1/2 inches over from the first hole to see how deep the wood is in that spot.  I did this and striking another area where the wood was ane-1/2 inches.  This tells me that I didn't hit a vertical stud (considering of the distance apart) and it must exist the header.

Since I do accept the hollow space backside my fireplace information technology was time to get back there.  I wanted to get a actually skilful look at the framing.  I cutting a large access panel of the drywall out where I'd drilled my peep hole. Then I went full Shawshank Redemption and shimmied into the cavity.

I took some measurements to brand sure that I would be drilling into the header in the area where I planned to attach the Television set mountain and then came back out.

Cut Hole for Electric

Because I was able to go behind my fireplace and measure where the header and studs were located, I could easily choose an open area that I wanted to apply for the electric. In order to make an opening for the electric, I needed to remove a rock in that spot and then cut a hole.  I used my chisel to crack and removed the rock.

In one case the stone was gone I saw that it was set into wire mesh with mortar.  This sets over a sail of OSB with a layer of blackness tar paper in betwixt.  This is a pretty common installation so y'all might run into something similar if you have a rock or brick fireplace.

I drilled through the OSB and left the drill scrap in the hole so I could run across exactly where it was on the inside.

After confirming it was high enough over the header and to the right of that vertical stud I started removing the mortar and wire mesh so I could drill through the OSB.

I used tin snips and a screwdriver hither to pick away at the mesh and used a smaller masonry chisel out to assist when needed.  Subsequently a few minutes of work I had a clear spot to drill a hole for the electrical extension box.

I used the same hole saw from before and drilled through the OSB to get a spot for the extension wiring.

4. Install Electrical and Wire Chase

I used a wall ability kit to easily get power to my Television receiver.  Beginning I secured the power plug that has a female end into the hole I just made in the fireplace.  This is where I'll plug in the Idiot box.

Then I ran the other end of the power cord, that has a male connection to the built in bookshelves.  Side by side I secured that end of the ability cord into the wall as well.  And then I'll just accept to use an extension cord to plug information technology into the power that I already take in the area for my existing TV.

This ability string is rated to be in the walls then I felt expert using it.  But I'm not an electrician so if you have whatever concerns about doing this as well y'all should accomplish out to a professional.

Next I was fix to attach the concealment and wire chase.  Later going dorsum into the wall I realized the wire chase portion of this box wasn't going to piece of work since it went right into the wood header. So I removed the back with a multi-tool on this box and the other similar piece.

This let me fit a one-½" PVC pipe right onto the dorsum to apply it every bit a hunt for the low voltage wires.

I strapped the PVC to the studs to hold it business firm in place on the TV mount box.  This will protect the wires and brand it easier to run them without having to become in the wall.  I left the hunt open on the other end since I'll be rerouting the wires when I redo the built-ins later.

Finally I reinstalled the stones on the fireplace.  I used structure adhesive to put them dorsum in place and it bonded apace.

Run Wires Through Chase

I ran two HDMI cables through the wire chase and out through the hole I'd made in the upper cabinet.

So I installed the wall plates that held the cables along with the male side of the extension wire. These get screwed in identify only like the other one.  The trim rings go over the boxes and it gives a very squeamish make clean look.

Plugging the extension cord in from an existing wall socket to the male side adapter completes the connexion and I had electrical set up at the fireplace.

5. Adhere TV Mount

Now I could move on to getting the Tv mounted on this uneven stone.  I setup a light amplification by stimulated emission of radiation level to make things easier to position and put the wall subclass in place where information technology would sit firmly. My wife held upwardly the bracket and I used a bamboo skewer to bear on the rock behind the bracket and mark the offset.  I'll apply these marks to set the spacers after.

I also marked the locations for the holes on the rock.  This was easier for me since I was drilling into a full header instead of trying to hit vertical studs.  This meant I could pick any spot along the subclass. After indenting the stone with a dial for a good start, I drilled through the stone veneers with a masonry flake.

I removed all the concrete dust and and so drilled a little more than with a wood/metal bit to make sure I hit the forest and didn't get stopped past the metallic mesh.

Add Spacers to Screws Secure to Fireplace

I'thousand using 6" self-tapping lag screws to hang the mount which will give me plenty of bite into the header.  I used the markings from the skewers to stack spacers and washers until I had the right offset. The spacers came with the Goggle box mount I'g using and really worked awesome.

Then I added the spacers to each screw and attached them to the Television mount.

I did a test fit on the wall and saw I needed a few more washers on the top left.  The goal is to take the bracket house and not rocking at all when yous button it flat to the stone.

I added the extra washers and so drove the lags into the header with an affect driver, stopping before pulling them tight.

So I switched over to my ratchet and collection the screws in the rest of the manner.  Most screw bits fit right into a ¼" socket and this makes it easy to snug things upwards without worrying virtually over driving the screws.

6. Mountain Idiot box to the Fireplace

Finally I connected the mount arms to the Telly using the included screws.

And so nosotros hung this beautiful tv on the wall.  Information technology was actually like shooting fish in a barrel to lower the mount artillery on the bracket and only listen for the click which told us it was secure.

One thing I love virtually this TV mount is that information technology swings out on either side for easy access to wire things up.  I connected the power on one side and the HDMI and an antenna on the other.

So we peeled off the wrapper and fired upward the LG OLED Tv set to bank check it out.  This TV is a massive upgrade from my old one. The wallpaper-thin blueprint makes it look similar the TV is just floating above the fireplace and let'due south the picture be the star of the show. This Tv set is actually going to transform movie night at the Rodriguez house.

If you're thinking of mounting a Idiot box above a fireplace I promise this helps you out!  And if yous're interested in more great Home DIY Projects I've got a lot of them for you to check out!

Source: https://fixthisbuildthat.com/mounting-a-tv-above-a-fireplace/

Posted by: mcdonaldgrot1995.blogspot.com

Share this post